🛒 SHOP DUMPIEE
Home › Blog › Garbage Bag Thickness (Micron) Guide and Calculator

Garbage Bag Thickness (Micron) Guide and Calculator

Micron tells you how thick a garbage bag is. Learn what it means, how it connects to size and weight, and work out any one value with the calculator below.

By Primecore Manufacturing Private Limited, Rajkot · 9 November 2026

What is a micron?

A micron (written µ, also called a micrometre) is one thousandth of a millimetre. A 10 micron bag is about 0.01 mm thick. For comparison, a human hair is roughly 70 microns thick, so a 10 micron garbage bag film is several times thinner than a hair. It is thin, so small differences in micron matter.

Why does thickness matter?

Thickness is one of the things that decide how much weight a bag can carry and how well it resists tearing. It is not the only factor: the material (LDPE, HDPE), the seal type and how full the bag is also matter. But two bags of the same size with different thickness will also have different weights, and that weight is the easiest way to check thickness.

How size, weight and micron are linked

A flat garbage bag is two layers of film. So the weight of one bag is the film volume times the density of the plastic:

Weight of one bag = 2 × width × length × thickness × density

For bag sizes in inches and a typical film density of 0.93 g/cm³, this gives two easy rules:

Micron ≈ 833 × weight of one bag (g) ÷ (width in × length in)
Weight of one bag (g) ≈ micron × width in × length in ÷ 833

Example: Dumpiee Medium (19 × 21 in)

A roll weighs about 125 g and has 30 bags, so one bag weighs 125 ÷ 30 = 4.17 g. Micron ≈ 833 × 4.17 ÷ (19 × 21) = 833 × 4.17 ÷ 399 ≈ 8.7 micron, which matches the 8–10 micron range we use for this size.

Micron calculator

Find the width, length (height), thickness (micron) or weight of a garbage bag. Enter the other three and the calculator gives the fourth. You can also use it to check a supplier’s claim. If a supplier quotes a thickness and a roll weight, the calculator shows whether they fit together.

Find any one value in 3 easy steps

  1. Choose inches or cm.
  2. Fill in any 3 boxes from: bag Width, Length (height), Thickness (micron) and Weight.
  3. The 4th box locks and shows your answer.

Want to find something else? Clear any one box and the lock moves to the empty box.

Filled 0 of 3. Fill any 3 boxes.

Size unit
Advanced: material density

LDPE is about 0.91–0.93 and HDPE about 0.94–0.96. The default 0.93 suits a mixed film.

Fill any three boxes. The fourth box will lock and show your answer.

Dumpiee thickness by size

SizeDimensionsThicknessWeight / roll
Small17 × 19 in8–10 µ100 g
Medium19 × 21 in8–10 µ125 g
Large24 × 32 in9–10 µ145 g
Extra Large30 × 37 in11–12 µ225 g
Jumbo30 × 50 in13–15 µ250 g
Medium Jumbo35 × 45 in22–24 µ400 g
Extra Jumbo36 × 48 in17–19 µ360 g
Super Jumbo40 × 50 in17–19 µ420 g

Thickness and weight are approximate ranges.

How to choose

Bigger bins hold more and heavier waste, so larger bags are made thicker. Light household and office waste usually suits our smaller sizes. For heavier or wet waste, choose a larger and thicker size. If you are between two sizes, take the bigger one. Not sure? Use the size finder or ask us.

Good to know

The calculator gives an estimate. It assumes a flat two-layer bag and a film density you can change. Real bags differ by a few percent because of seals, gussets, additives and manufacturing tolerance.

Related

Need garbage bag rolls?

Share size, colour, packing and quantity.